Click here for Headlight Relay Kits

P001: Pedapter ignition adapter with switchable coil voltage for 67-71 vehicles Deliver full battery voltage to your PerTronix ignition module, electric choke or other under hood device with a Pedapter. This plug-in box is turned on and off with the ignition key. Primary voltage to the coil is switchable between OEM 9V and battery 12V. Benefits: Easy to install with no cutting of your original harness. Delivers full battery voltage to your PerTronix or other device. Unit has built in fail-over protection that will default both outputs to OEM voltage if the unit fails. Compact size - box measures less than 2x2x1.5 *Notes: Not for use on 72-73 Mustangs and Cougars with the four wire engine harness. OEM tachometer will NOT function without a tach adapter if 12V coil input is selected. Aftermarket and RCCI conversion tachs willl function in either mode. Instructions for wiring the MSD 8920 tach adapter to allow the OEM tach to work with a 12V coil are on the Instructions page. Available?  Yes. Estimated ship date: Friday, March 6th $40.00 Click here for installation instructions CA residents Prop 65 Warning www.P65warnings.com

P002: Pedapter ignition adapter for 67-71 vehicles Deliver full battery voltage to your PerTronix ignition module, electric choke or other under hood device with a Pedapter. This plug-in box is turned on and off with the ignition key. Voltage to the coil is a constant OEM 9V. Benefits: Easy to install with no cutting of your original harness. Delivers full battery voltage to your PerTronix or other device. Unit has built in fail-over protection that will default the accessory output to OEM voltage if the unit fails. Compact size - box measures less than 2x2x1.5 *Notes: Not for use on 72-73 Mustangs and Cougars with the four wire engine harness. Available?  Yes. Estimated ship date: Friday, March 6th $34.00 Click here for installation instructions CA residents Prop 65 Warning www.P65warnings.com

SWR004: Modern Seatbelt Warning Relay for 66-72 vehicles This innovation replaces the C6AB-10B924-x and D2AB-10B924-xx Seatbelt Warning Lamp Relays. These are the relays that make the Seat Belts light come on at start up and turn off after 7-10 seconds. The originals are prone to burn out and are not made anymore. My SWR004 uses a modern timer circuit to replace your burnt out relay. Timer box is 2x2x1.5 and has two mounting tabs. Easy plug in replacement. Instructions included. Available?  No Click here for installation instructions CA residents Prop 65 Warning www.P65warnings.com