|
About Rocketman Voltmeters
All Rocketman Volt Meters are converted to state of the art circuitry. These
are not repaired or rebuilt meters - the only original parts used are the dial, case and pointer.
Unless you request otherwise they are calibrated to read centered at 12.5VDC, so you can tell at a glance what your charging system is doing - to the right of center is charging, to the left of center indicates discharge. Meters with volt faces are calibrated to the highest marked value.
Volt meter works with all 12 volt charging systems - original, 1 wire, internal regulator, external regulator, etc.
The pointer will NOT be centered like an Amp gauge without power. When unpowered the needle will sweep far left.
Volt meters are built to display normal OEM voltage (13.2-13.8 volts) to right of center, less (discharge) to left.
Pointers are repainted to original color. Normally bright white or 'fluorescent red' that looks like the pointer did when new.
Ammeter conversion and prices are for OEM ammeters only - NOT new aftermarket ammeters. I do not convert aftermarket meters.
|
|
